PALLET TRACKING – MAINTENANCE – UPDATE PALLET CONTENTS

Update 22 Init 12

Overview:

This screen allows you to update various fields for a pallet including the Quantity on the Pallet.

Notes:

• When updating the pallet, always enter the Qty to Adjust first and click Enter. If not adjusting the Qty, leave the Qty to adjust at 0 then click enter. The Update button will not enable until this is done.

Fields:

• Qty to Adjust
  • This is the amount to add or remove from the Pallet. To remove items from the pallet, enter a negative value here. To not change the Quantity, leave this field at Zero.
  • Click the Enter button after the desired value is in the field.
• Pallet ID
  • Enter an updated Pallet ID as desired.
  • The Prompt for this field can be changed using the System Setting Pallet Tracking: Pallet ID Name
• Vendor #
  • Enter an updated Vendor # as desired.
  • The Prompt for this field can be changed using the System Setting Pallet Tracking: Vendor Name
• Inbound Carrier
  • Enter an updated Inbound Carrier desired.
  • The Prompt for this field can be changed using the System Setting Pallet Tracking: Inbound Carrier Name
• Lot
  • Enter an updated Lot as desired.
  • The Prompt for this field can be changed using the System Setting Pallet Tracking: Lot Name
• Size
  • Enter an updated Size as desired.
  • The Prompt for this field can be changed using the System Setting Pallet Tracking: Size Name
• EXP Date.
  • Update the Expiration Date for the Pallet Contents. Check None if there is no expiration date, otherwise uncheck None to change the date.
  • The Prompt for this field can be changed using the System Setting Pallet Tracking: Exp Date Name
• Ref
  • Enter an updated Ref as desired.
  • The Prompt for this field can be changed using the System Setting Pallet Tracking: Inbound Reference Name
• Ship Instructions
  • Enter updated Shipo Instructions as desired.
  • The Prompt for this field can be changed using the System Setting Pallet Tracking: Shipping Instructions Name
• Productid
  • This field displays the Product currently on the Pallet. This field cannot be changed using this screen. Instead, use the Reclassify function on the Pallet Maintenance screen.
• Description
  • Enter an updated Product Description as desired.
  • The Prompt for this field can be changed using the System Setting Pallet Tracking: Description Name
• Weight
  • This field is automatically calculated when the Qty to Adjust is enterred.
• Cube
  • This field is automatically calculated when the Qty to Adjust is enterred.
• History Comment
  • A comment may be entered here which will be placed in a Product History entry for this update.

Buttons

• Enter
  • Enters the Qty to adjust. This must be clicked before the Update Button will be enabled.
  • After this is clicked, the Qty To Adjust is locked. To change it, click the Reset Button.
  • If the Qty to adjust is non-zero, the Weight and Cube will be recalculated based on the new Qty to Adjust.
• Reset
  • Re-Enables the Qty To Adjust so that it can be changed. Click Enter after the change is made.
• Update
  • Updates the Qty and/or Header fields for the pallet.
  • This field will not be enabled until a Qty to Adjust is Enterred.
• OK / Cancel
  • Either of these buttons close the window.

Errors:

Failed to get source records